Price List For Hot Dip Galvanized Products

Valid for delivery to the territory of the RPC. Please refer to our General Provisions and Terms and Conditions of Delivery and Payment for information about special provisions, price validity, pricing procedures, places of shipments, taxes, charges, delivery, payment, reselling and customs. All prices are net and excluding VAT, duty and other taxes.

Valid as of: 2017.11.01

Terms of delivery: Ex Works, Dalian


1.Base price


1.1 Part effective price in RMB/t for HDG in coils
Designation RMB/t
Base Price 6530

2.Extras


2.1 Grades
Designation 2.1.1DEEP DRAWING STEELS RMB/t
DX51D+Z   -1310
DX52D+Z   -50
DX53D+Z   250
DX54D+Z   800
DX56D+Z   1150
DX57D+Z   1250

Designation 2.1.2BAKE HARDENING STEELS RMB/t
H180BD+Z 1040
H220BD+Z 1150
H220BD+Z(ULC) (*)
H260BD+Z 1250
H300BD+Z 1400

Designation 2.1.3INTERSTITIAL-FREE HIGH STRENGTH STEELS RMB/t
H180YD+Z   970
H220YD+Z   1180
H260YD+Z   1385

Designation 2.1.4PHOSPHOR ALLOYED STEELS RMB/t
H220PD+Z   765
H260PD+Z   905
H300PD+Z   990

Designation 2.1.5MICROALLOYED STEELS RMB/t
H260LAD+Z   1150
H300LAD+Z   1250
H340LAD+Z   1250
H380LAD+Z   1250
H420LAD+Z   1350
H460LAD+Z   1350
H500LAD+Z   1350

Designation 2.1.6WORK HARDENING STEELS RMB/t
WHZ300+Z   (*)
WHZ420+Z   (*)

Designation 2.1.7DUAL PHASE STEELS RMB/t
HCT500X   1350
HCT600X   1450
HCT600X FE*   (*)
HCT780X   1840
HCT980X   2140

Remark

*FE: FormingExcellence, higher elongation compared to standard grade

(*) price on request

2.2 Surface Treatment(RMB/t)
Item Oil AFP TAPP-GI(Z) TAPP-GA(ZF) Chromating
Extra 0 300 150 150 100

For AFP and Chromating TAGAL will use CRVI free coatings

TAPP - TAGAL Perfect Posttreatment: Product with micro layer surface treatment


2.3 TABS - Optimized surface structure for best paint appearance(RMB/t)
Item TABS (TAGAL Best Surface)
Extra 300

2.4 Coil weight extras/allowances(RMB/t)
Weight >=9t
Extra/allowance -100

2.5 Extras for coating and finish(RMB/t)
Item A B C
Skinpass 0 0 300
Galvannealed (ZF/GA) 100 100 100

2.6 Extras for reduced tolerances(Reduced tolerance according to DIN EN 10143)
Item RMB/t
On thickness 200
On width 200
On flatness(Normal:>2mm,<=9mm) 0
On flatness(High:<=2mm) 200

2.7 Extras/allowances for zinc coating(RMB/t)
Thickness(mm) Coating in g/m², two sides
60-119 120-139 140-159 160-179 180-199 200-219 220-279
0.40-0.44 280 330 380 430 480 530 580
0.45-0.49 240 290 340 390 440 490 540
0.50-0.54 200 250 300 350 400 450 500
0.55-0.59 180 230 280 330 380 430 480
0.60-0.69 130 180 230 280 330 380 430
0.70-0.79 100 150 200 250 300 350 400
0.80-0.89 50 100 150 200 250 300 350
0.90-0.99 30 80 130 180 230 280 330
1.00-1.24 0 50 100 150 200 250 300
1.25-1.49 -30 20 70 120 170 220 270
1.5-1.74 -30 20 70 120 170 220 270
1.75-1.79 -50 0 50 100 150 200 250
1.8-1.99 -50 0 50 100 150 200 250
2.0-2.29 -60 -10 40 90 140 190 240
2.3-3.0 -60 -10 40 90 140 190 240

For deliveries of differential zinc coatings the two coatings are added.

The total zinc coating determines the coating group to be charged by agreement.


2.8 Extras for width and thickness, combined(RMB/t)
Thickness(mm) Width(mm)
500-799 800-999 1000-1199 1200-1499 1500-1699 1700-1800
0.40-0.44 1347 1327 1207 1087 1337 1387
0.45-0.49 1287 1267 1147 1027 1277 1327
0.50-0.54 1227 1207 1087 967 1217 1267
0.55-0.59 1247 1227 1107 987 1237 1287
0.60-0.69 1197 1177 1057 937 1087 1137
0.70-0.79 1127 1107 987 867 1017 1067
0.80-0.89 1127 1107 987 867 1017 1067
0.90-0.99 1147 1127 1007 887 1037 1087
1.00-1.24 1127 1107 987 867 1017 1067
1.25-1.49 1157 1137 1017 897 1047 1097
1.50-1.74 1207 1187 1067 947 1097 1147
1.75-1.79 1227 1207 1087 967 1117 1167
1.80-1.99 1377 1357 1137 1017 1167 1217
2.0-2.29 1387 1367 1147 1027 1177 1227
2.3-3.0 1587 1567 1347 1227 1377 1427

Narrower widths on request


2.9 Minimum ordering and minimum delivery weight per item
An item is defined as a part of a purchase order in 1a quality in one grade, finish and size per delivery as one consignment to one recipient at one place of destination. RMB/t
20t and more
>=15t, <20t 100
>=10t, <15t 150
>=5t, <10t 200

An item is defined as a part of a purchase order in 1a quality in one grade, finish and size per delivery as one consignment to one recipient at one place of destination.

A contract for order quantity should be more than 23 tonnes.


3.Packaging


Item OG OR OM OV(O5)
Extra/allowance -30 0 30 50